Flexible lances make pipe cleaning a breeze, snaking around bends and curves to clean pipes with bends or where access to the pipe entry is limited and prevents the use of a rigid lance.
|For use with a blasting gun or foot valve
Op. pressure: 1000; 1200 bar
Lengths: 6; 10; 15; 20 m
i/d‘s: 4; 6 mm
For use with a hose or foot valve
With M 24x1,5 DKO union nut
|Heat exchanger tube internal cleaning nozzles
Various combinations possible dependant upon nozzle bore sizes.
|With push bores
Cleans in front of the nozzle. Only in combination with pull bores when using flexible lances
|With pull bores
Cleans behind the nozzle. Reaction force of the water jets effects the movement through the tube
|90° radial bores
Maximum cleaning power direct to the tube wall
|Central axial bore
For cleaning fully blocked tubes
For straight pipes and tubes (heat exchangers, oilers, etc.), we also offer rigid lances. Both reduce risk of injury by putting distance between operators and the water jets (up to 2,800 bar).